| Process Design for Closed Die Forging of Bevel Gear by Finite Element Analyses
J.-H. Song and Y.-T. Im |
| Fluid-Pressure-Assisted Deep Drawing
S. Thiruvarudchelvan and M.J. Tan |
| A Flexible Shear Spinning of Axi-Symmetrical Shells with a General-Purpose Mandrel
K. Kawai, L.-N. Yang and H. Kudo |
| Influence of Embossing and Restoration Process on the Mechanical Properties of Aluminum Alloy Sheets
C.S. Namoco, Jr., T. Iizuka , K. Narita, N. Hatanaka, N. Takakura and K. Yamaguchi |
| Processing of Thin Metal Strip by Casting-cum-Rolling
S.X. Zhang, H.M. Myo, K.B. Lim, K.K. Tong, M.S. Yong, S.F. Pook and M.W. Fu |
| Casting of Wire Inserted Composit Aluminum Alloy Strip Using a Twin Roll Caster
T. Haga, K. Takahashi, H. Watari and S. Kumai |
| The Effect of Solidification Time in Squeeze Casting of Aluminium and Zinc Alloys
L.J. Yang |
| Study of Deformation Homogeneity in the Multi-Pass Equal Channel Angular Extrusion Process
Y.W. Tham, M.W. Fu, H.H. Hng, M.S. Yong and K.B. Lim |
| Study on Flanged Shapes in Fineblanked-Hole Flanging Process (FB-Hole Flanging Process) using Finite Element Method (FEM)
Sutasn Thipprakmas, Masahiko Jin and Masao Murakawa |
| An Investigation of Material Flow Analysis in Fineblanking Process
Sutasn Thipprakmas, Masahiko Jin and Masao Murakawa |
| Experiments of T-Shape Hydroforming with Counter Punch
Y.M. Hwang, T.C. Lin and W.C. Chang |
| High Pressure Diecasting Module of InteCAST Software and its Applications
J.X. Zhou, L.L. Chen, D.M. Liao and R.X. Liu |
| Synthesis of Complex Ceramics by Mechanochemical Activation
T. Sritharan, F.Y.C. Boey and A. Srinivas |
| Microstructure Formation during Sintering of Porous Ti-Si-Zr with MA-Activated Ti-Si and TiH2 Powders
K.L.S. Goi, A.E.W. Jarfors, D.L. Butler, Y. Gu, J.M.S. Yong and D.C.S. Lim |
| Transfer Molding of Bamboo
O. Yamashita, Yokochi, H. Imanishi and K. Kanayama |
| Back Pressure Equal Channel Angular Consolidation - Application in Producing Aluminium Matrix Composites with Fine Flyash Particles
X. Wu and K. Xia |
| Effect of Deformation Condition on Structure Development in Nickel Base Alloy
P. Wangyao, L. Kraus, J. Zrnik and S. Nemecek |
| Relationship of Microstructure and Mechanical Properties of TRIP Aided Steel Processed by Press Forging
J. Zrnik, O. Stejskal, Z. Novy and P. Hornak |
| An Analysis of Forming Limit in the Elliptic Hole-Flanging Process of Sheet Metal
Tsung-Chia Chen |
| High Temperature Deformation in Ti-5Al-2.5Sn Alloy
M.J. Tan, G.W. Chen and S. Thiruvarudchelvan |
| High Porosity and Large Pore-size Shape Memory Alloys Fabricated by Using Poreforming Agent (NH4HCO3) and Capsule-free Hot Isostatic Pressing
Y.P. Zhang, B. Yuan, M. Q. Zeng, C.Y. Chung, M. Zhu and X.P. Zhang |
| Structure and Properties of Gradient Tool Materials with HS6-5-2 High-Speed Steel
L.A. Dobrzański, A. Kloc-Ptaszna, G. Matula and J.M. Torralba |
| Deformation Behavior and Strain Homogeneity in Equal Channel Angular Extrusion/Pressing
A.V. Nagasekhar, Yip Tick-Hon and H.P. Seow |
| Diffusion Bonding of Ti/Graphite and Ti/Diamond by Hot Isostatic Pressing Method
J. Tanabe, T. Sasaki and S. Kishi |
| Maximum m Value Superplasticity Deformation for Ti-6Al-4V Titanium Alloy
GaoChao Wang and M.W. Fu |
| Hydrothermal Synthesis and Characterization of Mesoporous SnO2/SnO2-SiO2 on Neutral Template
Jie Zhu,, B.Y. Tay and Jan Ma |
| Structure and Properties of the Magnesium Casting Alloys
L.A. Dobrzański, T. Tański, L. Cížek and Z. Brytan |
| Bulk Nanostructured Processing of Aluminum Alloy
Y.W. Tham, M.W. Fu, H.H. Hng, M.S. Yong and K.B. Lim |
| Applications of the Artificial Intelligence Methods for Modelling of the ACAlSi7Cu Alloy Crystallization Process
L.A Dobrzanski, R. Maniara, J. Sokolowski, W. Kasprzak, M. Krupinski and Z. Brytan |
| A Study on the Thermodynamics of In-Situ MgAl2O4/Al MMC Formation using Amorphous Silica Sources
V.M. Sreekumar, R.M. Pillai, B.C. Pai and M. Chakraborty |
| 3D Nano-Scale Cutting Model for Nickel Material
Zone-Ching Lin, Jen-Ching Huang and Yeau-Ren Jeng |
| Parametric Study on Thrust Force of Core Drill
C.C. Tsao and H. Hocheng |
| Empirical Analysis of Cutting Force Constants in Micro End Milling Operations
G. Newby, S. Venkatachalam and S.Y. Liang |
| Development of cBN Ball-Nosed End Mill with Newly Designed Cutting Edge
Masahiko Jin, Isamu Goto, Takeshi Watanabe, Jun-ichi Kurosawa and Masao Murakawa |
| Analysis Acoustic Emission and Sound during the Paperboard of Cutting Process
Y. Fukuzawa, S. Nagasawa, S. Suzuki, I. Katayama and A. Sadamoto |
| An Investigation on Cutting Forces and Surface Damage in High-Speed Turning of Inconel 718
R.S. Pawade, Suhas S. Joshi, P.K. Brahmankar and M. Rahman |
| Effectiveness of Uncoated WC-Co and PCD Inserts in End Milling of Titanium Alloy - Ti-6Al-4V
A.K.M. Nurul Amin, Ahmad F. Ismail and Nor Khairusshima M.K. |
| A Study on Ultrasonic Vibration Cutting of Low Alloy Steel
Chandra Nath, M. Rahman and S.S.K. Andrew |
| Surface Finish and Integrity of Machined Surfaces on Al/SiCp Composites
Uday A. Dabade, Suhas S. Joshi, R. Balasubramaniam and V.V. Bhanuprasad |
| On the Effect of Electrode Rotation on the Geometric Characteristics of Holes Machined using Micro-ECM
Nitin S. Banait, Suhas S. Joshi, R. Balasubramaniam and V. K. Suri |
| Effect of Surface Hardness of Counter Plate on Crushing of Blade Tip During Pushing Cut of Paperboard
Shigeru Nagasawa, Satoshi Nagae, Yasushi Fukuzawa, Seksan Chaijit, Ken Yamashita, Mitsuhiro Murayama and Isamu Katayama |
| Removal Rate and Surface Roughness in the Lapping and Polishing of RB-SiC Optical Components
H.Y. Tama, H.B. Cheng and Y.W. Wang |
| High Speed MQL Finish-turning of Inconel 718 with Different Coated Tools
Y. Kamata and T. Obikawa |
| Design of Effective Polishing Process of Castings Freeform Surface in Ultrasonic Electrochemical Finishing
P.S. Pa |
| Development and Performance Evaluation of an Ultra Precision ELID Grinding Machine
T. Saleh, M. Sazedur Rahman, H.S. Lim and M. Rahman |
| Effects of Wire-EDM Machining Variables on Surface Roughness of Newly Developed DC 53 Die Steel: Design of Experiments and Regression Model
K. Kanlayasiri and S. Boonmung |
| An Alternate Approach to Free-Form Surface Fabrication
Ka-Lok Yiu and Hon-Yuen Tam |
| Electrode Form Design of Holes of Die Materials in Ultrasonic Electrochemical Finishing
P.S. Pa |
| Comparison on Linear Synchronous Motors and Conventional Rotary Motors Driven Wire-EDM Processes
Albert W.-J. Hsue, M.-T. Yan and S.-S. Ke |
| Developing the Polymer Abrasive Gels in AFM Process
A.C. Wang and S.H. Weng |
| Intelligent Identification of Turning Process based on Pattern Recognition of Cutting States
S. Tangjitsitcharoen and T. Moriwaki |
| Characteristics of ZnO Thin Film Deposited by Ion Beam Sputter
Hung-Yin Tsai |
| Photocatalytic Activity of Doped TiO2 Coatings Prepared by Sputtering Deposition
Sung-Mao Chiu, Zhi-Sheng Chen, Kuo-Yuan Yang, Yu-Lung Hsu and Dershin Gan |
| The Study of Rapid Prototyping Process with Embedded Functional Inserts
Y.S. Liao, H.C. Li and M.T. Chen |
| Development of Epoxy Matrix Composites for Rapid Tooling Applications
S. Ma, I. Gibson, G. Balaji and Q. J. Hu |
| Pocketing Toolpath Optimization for Sharp Corners
Z.Y. Zhao, C.Y. Wang, H.M. Zhou and Z. Qin |
| Tool Design for the Tubular Press Forming of a Rear Suspension Member with the Finite Element Analysis
S.H. Kim |
| Investigation into Cold Extrusion of Aluminum Billets using Three-Dimensional Finite Element Method
Dyi-Cheng Chen, Sheng-Kai Syu, Cing-Hong Wu and Sin-Kai |
| Toolpath Generation for Diamond Shaping of Aspheric Lens Array
Chao-Chang A. Chen, Chien-Ming Chen and Jr-Rung Chen |
| Analysis of Draw-Wall Wrinkling in the Stamping of a Motorcycle Oil Tank
Fuh-Kuo Chen and Yeu-Ching Liao |
| Investigation of the Influence of Process Parameters on Hot Extrusion of Magnesium Alloy Tubes
S. H. Hsiang and Y. W. Lin |
| Feasibility Study of Twin Roll Casting Process for Magnesium Alloys
H. Watari, T. Haga, N. Koga and K. Davey |
| Experimental Investigation for Ultrasonic Vibration-Assisted Tapping
Kei-Lin Kuo |
| Two Stages Sintering of Nano-Sized Yttria Stabilized Zirconia Process by Powder Injection Moulding
P.C. Yu, Q.F. Li, J.Y.H. Fuh, T. Li and L. Lu |
| Weaving Technology and Mechanical Properties of Extended-PTFE Fabrics
Ching-Wen Lou, Ching-Wen Lin, Chen-Hwan Lei, Hsin-Chuan Chen, Yu-Ming Li and Jia-Horng Lin |
| Optimal Process of Warp-Knitting Fabric with Multiple Functions
C.W. Lou, C.H. Lei, C.W. Chang, J.M. Chen, Chan-Hung Hsu C.B. Huang and J.H. Lin |
| Thermo-Elasto-Plastic Finite Element Analysis of Quenching Process of Carbon Steel
S.H. Kang and Y.T Im |
| Image Segmentation and Analysis for Porosity Measurement
A.A. Malcolm, H.Y. Leong, A.C. Spowage and A.P. Shacklock |
| Influence of Initial Texture on Formability of Aluminum Sheet Metal by Crystal Plasticity FE Simulation
Yipingn Chen, W.B. Lee and Sandy To |
| A Study of Forming Pressure in the Tube-Hydroforming Process
Fuh-Kuo Chen, Shao-Jun Wang and Ray-Hau Lin |
| Developing a Realistic FE Analysis Method for the Welding of a NET Single-Bead-on-Plate Test Specimen
X.Y. Shan, M.J. Tan and N.P. O'Dowd |
| Modelling of CCT Diagrams for Engineering and Constructional Steels
J. Trzaska and L.A. Dobrzański |
| Solidification Modeling in Continuous Casting by Finite Point Method
Lei Zhang, Yi-Ming Rong, Hou-Fa Shen and Tian-You Huang |
| The Simulation of the Multi-Pass and Die-Less Spinning Process
Chun-Ho Liu |
| Temperature History for Cutting of Ceramics Preheated by a CO2 Laser
C.Y. Ho, J.E. Ho, M.Y. Wen and D.Y. Chen |
| Computer Simulation of Hard Magnetic Composite Materials Nd-Fe-B Properties
L.A. Dobrzański, M. Drak and J. Trzaska |
| Numerical Analysis for Bifurcation Fracture of Sheet Metal Forming
You-Min Huang and Sinhou Kuriyama |
| Study of the Temperature and Stress in Nanoscale Ductile Mode Cutting of Silicon using Molecular Dynamics Simulation
M.B. Cai, X.P. Li and M. Rahman |
| Investigations into the Effects of Electron Beam Welding on Thick Ti-6Al-4V Titanium Alloy
N. Saresh, M. Gopalakrishna Pillai and Jose Mathew |
| Surface Transformation of DF-2 Steel After Continuous Mode Laser Irradiation
M. Hua, Sedao, T.M. Shao and H.Y. Tam |
| Manufacture Processing and Degradation Properties Analyses of Medical Hybrid Dressing
Ching-Wen Lou, Cho-Hsun Lee, Chieh-Yu Chao, Yu-Chi Lee, I-Ju Tsai, Chen-Hwan Lei and Jia-Horng Lin |
| In Vitro Study of Bone-Like Apatite Coatings on Metallic Fiber Braids
Jia-Horng Lin, Ching-Wen Lou, Chia-Hao Chang, Yueh-Sheng Chen, Gau-Tyan Lin and Cho-Hsun Lee |
| Tool Based Micro Machining
A.B.M.A. Asad, Takeshi Masaki, M. Rahman, H.S. Lim and Y.S. Wong |
| Nanopatterning Mask Fabrication by Femtosecond Laser Irradiation
Y. Zhou, M.H. Hong, J.Y.H Fuh, L. Lu, B.S. Lukyanchuk, C.S. Lim and Z.B. Wang |
| Calculation of Strain Gradient in Flow Formulation using Strain Surface Function and its Applications to Micro Rolling
S.M. Byon and Y. Lee |
| Nanocrystalline Grain Size Control for Ni80Fe20/Cu Micro Composite Wires by Different Electrodeposition Methods
H.L. Seet, X.P. Li, K.S. Lee and H.Y. Chia |
| Manufacture of Three-Dimensional Valveless Micropump
Yih-Lin Cheng and Jiang-Hong Lin |
| Sub-Micron Surface Patterning by Laser Irradiation through Microlens Arrays
C.S. Lim, M.H. Hong, Y. Lin, G.X. Chen, A. Senthil Kumar, M. Rahman and G.C. Lim |
| Micro-mould Fabrication for a Micro-gear via Vacuum Casting
Y. Tang, W.K. Tan, J.Y.H. Fuh, H.T. Loh, Y.S. Wong, S.C.H. Thian and L. Lu |
| Hybrid Laser Micro/Nanofabrication of Phase Change Materials with Combination of Chemical Processing
Y. Lin, M.H. Hong, G.X. Chen, C.S. Lim, L.S. Tan, Z.B. Wang, L.P. Shi and T.C. Chong |
| Electrodeposition of Ni-Fe Micro Pillars Using Laser Drilled Templates
H.L. Seet, X.P. Li, M.H. Hong, K.S. Lee, K.H Teh and H.H. Teo |
| Cold Drawing of Micro Ni80Fe20/Cu Composite Wires
H.L. Seet, X.P. Li, K.S. Lee and L.Q. Liu |
| The Characteristics of Polyamide Layered-Silicate Nanocomposites
Suzhu Yu, Jianhong Zhao, Ge Chen, Yang Kay Juay and Ming Shyan Yong |
| Manufacturing Process and Property Analysis of Industrial Flame Retarded PET Fiber and Polyurethane Composite
I-Ju Tsai, Chen-Hwan Lei, Cho-Hsun Lee, Yu-Chi Lee, Ching-Wen Lou and Jia-Horng Lin |
| Performance Study of Compact Wood Powder Material Processing for Improved Impact Characteristics Aiming at Substitute for Plastics
T. Miki, K. Takeuchi, H. Sugimoto and K. Kanayama |
| PET/PP Blend with Bamboo Charcoal to Produce Functional Composite
Ching-Wen Lou, Ching-Wen Lin, Chen-Hwan Lei, Kuan-Hua Su, Chan-Hung Hsu, Zheng-Horng Liu and Jia-Horng Lin |
| Influence of Reprocessing on the Mechanical Properties and Structure of Polyamide 6
Kuan-Hua Su, Jia-Horng Lin and Chih-Ching Lin |
| Processing Treatment of a Lead-free Sn-Ag-Cu-Bi Solder by Rapid Laser-Beam Reflowing and the Creep Property of its Soldered Connection
X.P. Zhang, C.B. Yu, Y.P. Zhang, S. Shrestha and L. Dorn |
| The Investigation of Fiber Carding Performance with the Application of Static Electricity to Carded Nonwoven Fabric Process
Wen-Hao Hsing, Jia-Horng Lin and Kuo-Ting Kao |
| Comparison of Electromagnetic Shielding Effectiveness Properties of Diverse Conductive Textiles via Various Measurement Techniques
H.C. Chen, K.C. Lee, J.H. Lin and M. Koch |
